Google Analytics

Showing posts with label Cat5e. Show all posts
Showing posts with label Cat5e. Show all posts

Monday, July 5, 2010

Turning Wireless Routers Into WAPs


There’s a couple of ways to boost the Wi-Fi signal strength in a large home or business, the cheapest and easiest of which is to use a Range Expander, which is basically a signal repeater. I’ve experimented with them and found them to be functional, but lacking. You can read about it here: Linksys Wireless G Range Expanders.

The best way to boost your signal is to add a Wireless Access Point (WAP) or two in strategic locations and hardwire them back to your main router with CAT5e cable.

An Access Point is basically a wireless router without routing capabilities. There are many on the market, and for some reason they usually cost quite a bit more than wireless routers. A good example is the Linksys WAP610N, a nice device, but it’s twice the price of the WRT120N wireless router, with only half the functionality (1 wired LAN port vs. 4, no WAN port and no DHCP). You’re better served getting the WRT120N and dumbing it down a little. You’ll save money, you’ll have a spare Wi-Fi router “just in case”, and it’s really easy to do.

Here’s how:

Power up the router standalone, do not connect it to your network.

Plug your laptop into a LAN port on the router. Don’t plug in to the WAN (Internet) port. You won’t be using this port at all in this exercise.

Log in to the router by putting its address into the address bar of your web browser. Linksys routers have a default address of 192.168.1.1, as do most routers. Check your manual to be sure, though.

When prompted, leave the username field blank and enter admin for a password.

Now we’re going to change some settings, including the default address of the router. Save the address change for last though, as you’ll lose your admin session once you change it. No big deal, you can connect again, it just slows up the process.

Note: After each change, do a “Save Settings”.

Change the defualt password from admin to lock down the device. Be sure to write it down someplace safe!

Disable DHCP, you’re gonna let your main router hand out addresses.

Disable NAT (Network Address Translation). Once again, your main router is going to handle this.

Set the SSID and encryption key to match the main router's settings.

Change its broadcast channel to something other than what the main router is using. It’s a good practice to set it 5 channels off of the next nearest WAP or wireless router, ie: main is set for channel 1, next one is set for channel 6, next one is channel 11, etc.

Change its address. First, look to see what range your main router is handing out. A good bet is setting it to 192.168.1.2, as most manufactures set the routers to begin at .40 just for this reason, but be sure to check. An address conflict will hose you all up. Once again, be sure to write down the new address someplace safe. I keep Word documents with all the settings for each network I tweak.

One last save and that’s it, your wireless router is now a WAP.

The last step is to plug it in to your network. Use LAN port 1 on the new WAP, and any open LAN port on the main router. Refer to the diagram above.

You can add as many WAPs as you need for maximum coverage, and you will now be able to roam seamlessly between Access Points. Remember, each one needs to have its own unique address!

Saturday, May 9, 2009

Cat5 Twisted Pair Wire, The Unsung Hero Of The Internet Age

I was doing an archeological dig in a computer room the other day, and it struck me that of all the amazing advances we’ve seen in the world of computing in the last couple of decades, what stands out to me as the biggest catalyst and facilitator for them all, and one of the most overlooked advancements of these heady times, is the development of user and installer friendly networks via Cat5 twisted pair wiring.

Before Local Area Networks moved to distribution through twisted pair, it wasn’t very easy, or pretty, to make network access widely available in the home or workplace. In the early days of networking, the medium of choice for a long time was various types of coax. First there was Thicknet, a large and unwieldy beast that needed holes drilled in it to accommodate device taps. Not anything you could incorporate unobtrusively into a work or living space.

Then there was Thinnet, a thinner version of coax (RG58) than what we’re used to running for our TV’s. Although it could be easily integrated into an outlet box, and the cable itself wasn’t too big to conceal, it still meant needing a second delivery system to the location, twisted pair for phone and coax for data. Plus, it was a pain in the butt to connectorize.

The development of Category 5, 5e and 6 twisted pair wire, capable of transmitting both voice and data at high rates of speed, is an example of convergence at its very root. It’s allowed installation of a single type of physical medium on the premise, making connectivity easy, and because the T568B standard will support Ethernet transmission speeds up to 1000BASE-T, it’s extended the average life expectancy of the cable plant, saving a small fortune in wiring costs.

Easier, cheaper delivery on the premise means it’s easier to connect devices, which means it’s easier to deliver things like Wi-Fi. It’s also enabled delivery of PoE (Power over Ethernet) to the device, saving money, labor and space, not to mention greatly improving aesthetics, by delivering enough juice along with the Ethernet connection to power small devices, such as the aforementioned Wireless Access Points, without the need for a power outlet nearby, or an unsightly power cable.

It doesn’t stop there, though. New devices making use of Cat5 and above cabling are coming out all the time. I’ve been a big proponent of audio and video over Cat5 for quite a while, as it opens a whole new door in cable plant convergence. Although video over Ethernet is a great thing, it can cause unnecessary stress on a network in certain situations, and sometimes there’s a need to keep video segregated for privacy or security reasons. Having the ability to broadcast a separate stream of audio and video utilizing the existing cable plant gives you the ultimate in flexibility.

So, a tip of the hat to Cat5 twisted pair wire, its made being “connected” a piece of cake, and all this easy peasy connectivity has changed the way we do business and communicate.


End of transmission.